| 摘要: |
| 以A3钢为基体,在不同钼酸钠浓度、络合剂用量、pH值、温度条件下,化学镀Ni-Mo-P三元合金,探讨钼酸钠浓度、络合剂用量、pH值、温度对镀层沉积速度的影响,得出最佳工艺条件为:钼酸钠浓度0.2g/L;柠檬酸钠浓度45g/L;pH值9;温度90C。 |
| 关键词: 化学镀 Ni-Mo-P 沉积速度 |
| DOI： |
| 投稿时间：2002-09-11修订日期：2002-12-30 |
| 基金项目: |
|
| Deposition Rate of Ni-Mo-P Alloy in Chemical Plating |
|
Xiao Shunhua
|
| (Dept. of Material Eng., Guilin Institute of Tech., 12 Jianganlu, Guilin, Guangxi, 541004, China) |
| Abstract: |
| To study the effects of sodium molybdate, complexing agent, pH value, temperature on deposition of Ni-Mo-P Alloy in Chemical Plating,the steel A3 was used as base in the experiment of chemical plating of Ni-Mo-P Alloy. The favorest technological conditions are 0.2 g/L sodium molybdate,45 g/L sodium citrate,pH value 9 and temperature 90℃. |
| Key words: chemical plating Ni-Mo-P deposition rate |
