引用本文: |
-
张明华,王增科.利用擦痕对节理配套的方法及数据自动处理[J].广西科学院学报,2002,(3):97-103. [点击复制]
- Zhang Minghua,Wang Zengke.Mating of Joints and Data Automatically Processing with Slickensides[J].Journal of Guangxi Academy of Sciences,2002,(3):97-103. [点击复制]
|
|
|
|
本文已被:浏览 349次 下载 358次 |
码上扫一扫! |
利用擦痕对节理配套的方法及数据自动处理 |
张明华1, 王增科2
|
|
(1.桂林工学院资源与环境工程系, 桂林 541004;2.江西德兴铜矿, 江西德兴 334200) |
|
摘要: |
根据剪节理面上的擦痕与主应力轴的空间几何关系,由所测得的剪节理组的产状、剪节理面上的擦痕的方位,用定量求解的方法进行节理配套,找出与之配套的另一组剪节理。用计算机C语言设计出程序,借助微机自动完成其复杂的分析处理及配套过程。 |
关键词: 擦痕 剪节理 C程序 |
DOI: |
投稿时间:2002-02-05修订日期:2002-07-26 |
基金项目: |
|
Mating of Joints and Data Automatically Processing with Slickensides |
Zhang Minghua1, Wang Zengke2
|
(1.Dept. of Resource and Env. Eng., Guilin Institute of Tech., Guilin, 541004;2.Dexing Copper Ore of Jiangxi, Dexing, Jiangxi, 334200) |
Abstract: |
According to the geometric relations between main stress axies and slickensides on the plane of shear joints,joints can be matched quantitatively with attitudes of shear joint groups and orientations of slickensides on the plane of shear joint.The another joint group matching the current group can be found.The complicated analysis and match are completed automatically by means of microcomputer with C program. |
Key words: slickenside shear joint C program |
|
|